AIRSPRING VULCANIZER
Sleeve type airspring vulcanizer is used to vulcanize sleeve type airspring bellows. It equipped with 4 vulcanizing stations, and is suitable of diameter between 65mm to 95mm, and the length is 1050mm.
AIRSPRING BELLOWS BUILDING SYSTEM
This machine is manully feeding building machine, It is suitable for diaphragm type bellows diameter between 120mm to 300mm, and the length between 300mm to 900mm.
AUTOMATIC AIRSPRING BUILDING MACHINE
Automatic airspring building machine is used to make diaphragm airspring bellows. It is suitable for diameter between 120mm to 300mm, and length between 300mm to 900mm bellows.
2 HEATING 1 FORMING THERMOFORMING MACHINE
2 heating 1 forming thermoforming machine，also known as double thick sheet thermoforming machine, is mainly used for making plastic products with double layer structure, such as logistics pallets, shelf pallets and logistics turnover boxes which need to bear load, and containers which need heat preservation and heat insulation. It is suitable for most thermoplastics.
SLEEVE BUILDING LINE
Sleeve building line is used to produce sleeved type air spring bellows with diameter below 80mm. The building line includes three in one feeding rack, conveyor belt type building machine and four station vulcanizing machine. 1 meter long sleeve bellow can be made at one time with high production efficiency.
CORELESS ROLLING-UP MACHINE
Coreless rolling-up machine, used for air spring bellow, is to wrap the steel rings into rubber sheet at the two ends of the bellow after bellow forming. After rolling up process, the bellow can then be holed and vulcanized. Rolling-up is an important process in the production of air spring.
AUTOMATIC PUNCH MACHINE
Punching machine, also known as bellow punching machine, is an auxiliary equipment in the production of air spring. It is used to punch the bellow at the joint of the ring and the rubber before vulcanization. These punched holes are opened to the air to ensure the precision fitting of the ring and the rubber when the air spring is vulcanized. This can ensure the quality of the air spring.
SEMI AUTO THICK SHEET THERMOFORMING MACHINE
SH series semi-auto thick plate thermoforming machine is used for forming plastic which thickness is below 12mm. Including heating station, forming station, the machine needs to be equipped with additional trimming station, vacuum system and hydraulic system. The machine is used for making large plastic products such as traveling case, bathtubs, pit tubs, refrigerator inner and so on.
IN-MOLD CUTTING SERVO THERMOFORMING MACHINE
In-mold cutting servo thermoforming machine integrates punching station into forming position, which greatly improves the precision of products and simplifies the structure of the machine. It usually includes heating station, forming punching station and stacking station. Used to produce plastic products with thickness below 1.5mm, such as fast food box, fruit box and so on.
SMALL SEMI-AUTO BLISTER MACHINE
Small semi-auto thermoforming machine, namely sampling thermoforming machine is designed for small batch or samples products. It takes the principle of thermoplastics vacuum thermoforming. The machine has light weight, small size and easy operation. The heating station and forming station work at the same time, with high production efficiency.