AIRSPRING VULCANIZER
Sleeve type airspring vulcanizer is used to vulcanize sleeve type airspring bellows. It equipped with 4 vulcanizing stations, and is suitable of diameter between 65mm to 95mm, and the length is 1050mm.
AIRSPRING BELLOWS BUILDING SYSTEM
This machine is manully feeding building machine, It is suitable for diaphragm type bellows diameter between 120mm to 300mm, and the length between 300mm to 900mm.
AUTOMATIC AIRSPRING BUILDING MACHINE
Automatic airspring building machine is used to make diaphragm airspring bellows. It is suitable for diameter between 120mm to 300mm, and length between 300mm to 900mm bellows.
SLEEVE BUILDING LINE
Sleeve building line is used to produce sleeved type air spring bellows with diameter below 80mm. The building line includes three in one feeding rack, conveyor belt type building machine and four station vulcanizing machine. 1 meter long sleeve bellow can be made at one time with high production efficiency.
CORELESS ROLLING-UP MACHINE
Coreless rolling-up machine, used for air spring bellow, is to wrap the steel rings into rubber sheet at the two ends of the bellow after bellow forming. After rolling up process, the bellow can then be holed and vulcanized. Rolling-up is an important process in the production of air spring.
AUTOMATIC PUNCH MACHINE
Punching machine, also known as bellow punching machine, is an auxiliary equipment in the production of air spring. It is used to punch the bellow at the joint of the ring and the rubber before vulcanization. These punched holes are opened to the air to ensure the precision fitting of the ring and the rubber when the air spring is vulcanized. This can ensure the quality of the air spring.
BELLOWS BUILDER
Bellows builder is used to make rubber bellows for airspring. The inner layer, the cord fabrics and the outer layer rubber sheets are rolled into the bellows through the building drum.
Then turn up by the flip over device, the steel rings are wrapped into the bellows.
AIRSPRING BUILDER RACK
The rack is the supporting equipment of the bellows building machine, which is used for the fixed-length cutting of sealing sheet, endurance cord fabrics and oil-resistant outside rubber sheet. The rack has various forms. Our company’s six station vertical rack can be used for fixed length cutting of up to six kinds of materials.
AIRSPRING LIFETIME TEST MACHINE
Airspring lifetime test machine is designed referring to the national stand, GT/T 13061-2017.It is used to test bellows type and combined type airspring.
SLEEVED TYPE AIRSPRING TEST MACHINE
Sleeved type airspring, also called sleeve type airspring. This machine is designed according to national standard GB/T 13061-2017, and used for testing the longevity of diaphragm airspring.