凯撒大帝，作者RELIFE OFFICIAL WEBSITE

airspring vulcanizing machine — Zoom Details

AIRSPRING VULCANIZER

airspring machineBy 凯撒大帝 2024年2月12日 Leave a comment

Sleeve type airspring vulcanizer is used to vulcanize sleeve type airspring bellows. It equipped with 4 vulcanizing stations, and is suitable of diameter between 65mm to 95mm, and the length is 1050mm.

Airspring Building System — Zoom Details

AIRSPRING BELLOWS BUILDING SYSTEM

airspring machineBy 凯撒大帝 2024年2月9日 Leave a comment

This machine is manully feeding building machine, It is suitable for diaphragm type bellows diameter between 120mm to 300mm, and the length between 300mm to 900mm.

automatic airspring building system — Zoom Details

AUTOMATIC AIRSPRING BUILDING MACHINE

airspring machineBy 凯撒大帝 2024年2月9日 Leave a comment

Automatic airspring building machine is used to make diaphragm airspring bellows. It is suitable for diameter between 120mm to 300mm, and length between 300mm to 900mm bellows.

2 HEATING 1 FORMING THERMOFORMING MACHINE

plastics thermoforming machineBy 凯撒大帝 2022年6月2日

2 heating 1 forming thermoforming machine，also known as double thick sheet thermoforming machine, is mainly used for making plastic products with double layer structure, such as logistics pallets, shelf pallets and logistics turnover boxes which need to bear load, and containers which need heat preservation and heat insulation. It is suitable for most thermoplastics.

sleeve type airspring building machine — Zoom Details

SLEEVE BUILDING LINE

airspring machineBy 凯撒大帝 2022年5月17日

Sleeve building line is used to produce sleeved type air spring bellows with diameter below 80mm. The building line includes three in one feeding rack, conveyor belt type building machine and four station vulcanizing machine. 1 meter long sleeve bellow can be made at one time with high production efficiency.

CORELESS ROLLING-UP MACHINE

airspring machineBy 凯撒大帝 2022年5月16日

Coreless rolling-up machine, used for air spring bellow, is to wrap the steel rings into rubber sheet at the two ends of the bellow after bellow forming. After rolling up process, the bellow can then be holed and vulcanized. Rolling-up is an important process in the production of air spring.

AUTOMATIC PUNCH MACHINE

airspring machineBy 凯撒大帝 2022年5月16日

Punching machine, also known as bellow punching machine, is an auxiliary equipment in the production of air spring. It is used to punch the bellow at the joint of the ring and the rubber before vulcanization. These punched holes are opened to the air to ensure the precision fitting of the ring and the rubber when the air spring is vulcanized. This can ensure the quality of the air spring.

20TH ANNIVERSARY OF THE ESTABLISHMENT OF RELIFE

newsBy 凯撒大帝 2022年5月4日 Leave a comment

On the occasion of the 20th anniversary of the establishment of the Suzhou RELIFE company, thanks to all the support and help of new and old customers and friends. It is your support that keeps this company running afloatly. Thanks to the great motherland, the Communist Party and the government of the reform and opening up policy, to give enterprises a good development opportunities and environment, thanks to the family of the company’s understanding and help. The company has also experienced hardships and happiness from scratch.

thick plate thermoforming Machine500x2500 — Zoom Details

SEMI AUTO THICK SHEET THERMOFORMING MACHINE

plastics thermoforming machineBy 凯撒大帝 2022年5月4日

SH series semi-auto thick plate thermoforming machine is used for forming plastic which thickness is below 12mm. Including heating station, forming station, the machine needs to be equipped with additional trimming station, vacuum system and hydraulic system. The machine is used for making large plastic products such as traveling case, bathtubs, pit tubs, refrigerator inner and so on.

2 Station In-mold Cutting Thermoforming Machine — Zoom Details

IN-MOLD CUTTING SERVO THERMOFORMING MACHINE

plastics thermoforming machineBy 凯撒大帝 2022年4月26日

In-mold cutting servo thermoforming machine integrates punching station into forming position, which greatly improves the precision of products and simplifies the structure of the machine. It usually includes heating station, forming punching station and stacking station. Used to produce plastic products with thickness below 1.5mm, such as fast food box, fruit box and so on.